Gotta Show Products 602-237-4506
New Products Products Kit Instructions Dealers Show/Event Schedule Contact Us
Power Steering
Power Steering
A/C & Heater
Transmission Cooler
Fuel Kits
Engine Oil Cooler Kits
Transmission Dipsticks
Download our Catalog
Power Steering Hose Kits

We have designed a variety of power steering hose kits that solve the fitting identification and clearance problems typically found with hot rods.

Our hose kits are lined with aircraft quality Stainless Steel PTFE (2500 psi working pressure, 9000 psi burst pressure). They are cut to fit at the power steering pump end for exact fit for your application. Include unique UNI-SEAL™ designed fitting and thread pitch seals o-ring or inverted flare style racks, metric or SAE without adapters.

If you don't see a kit that fits your application we can build one just for you.

HUGE inventory ready to ship the SAME Day!
(24 hours on all Hand Polished kits)

Download our installation guides:
Power Steering Kit Instructions
Power Steering Hydro Boost Kit Instructions
Power Steering Rack Comparisons


Power Steering Hose Kits

All the kits below are a complete installation on vehicles where the pump has an integral reservoir (for remote reservoir setups refer to the remote reservoir section).

Basic hand tools are needed for installation.

Part # 131101
Description: Braided Stainless steel hose kit for Ford rack to GM or Ford pump (1 piece cast aluminum rack housing including TRW built Mustang II, Thunderbird and late model Mustang) - each hose 22”
Part # 131101B
Description: Matte Black braided hose kit for Ford rack to GM or Ford pump (1 piece cast aluminum housing. Including TRW built Mustang II, Thunderbird and late model Mustang) - each hose 22"
Part # 131101B-LS1
Description: Matte Black braided power steering hose kit for Ford rack to LS-1 and LS-3 pump (1 piece cast aluminum housing. Including TRW built Mustang II, Thunderbird and late model Mustang) - each hose 22"
Part # 131105
Description: Braided stainless steel hose kit for Ford rack to GM or Ford pump (steel rack, Mustang II & Pinto, with “bolt-on” pinion) - each hose 22”
Part # 131107
Description: Braided power steering hose kit for Ford rack to GM or Ford pump (1 piece cast aluminum rack housing including TRW built Mustang II, Thunderbird and late model Mustang) PASSENGER SIDE - each hose 36”
Part # 131107B
Description: Matte Black braided power steering hose kit for Ford rack to GM or Ford PASSENGER SIDE pump (1 piece cast aluminum housing, including TRW built Mustang II, Thunderbird and late model Mustang). Each hose 36"
Part # 131107B-LS1
Description: Matte Black power steering hose kit for Ford rack to GM or Ford PASSENGER SIDE LS-1 and LS-3 pumps (1 pice cast aluminum housing, including TRW built Mustang II, Thunderbird and late model Mustang). Each hose 36"
Part # 131112
Description: Braided power steering hose kit for Toyota gearbox to Ford or GM pump, PASSENGER or DRIVER side with 16mm pressure & return hoses - each hose 36”
Part # 131113
Description: Braided power steering hose kit for Toyota gearbox to Ford or GM pump, PASSENGER or DRIVER side with 16mm pressure and 17mm return hoses - each hose 36”
Part # 131141
Description: Braided power steering hose kit for Flaming River rack to GM or Ford, each hose 22"
Part # 131151
Description: Braided power steering hose kit for 1979 and earlier GM gearbox to GM pump - each hose 28”
Part # 131151B
Description: Matte Black braided stainless steel hose kit or 1965-1979 GM gearboxes to a GM or Ford pump. Each hose 28"
Part # 131151B-LS1
Description: Matte Black braided power steering hose kit for 1965-1979 GM gearboxes to LS-1 and LS-3 pumps
Part # 131171
Description: Braided power steering hose kit for 1980 and later GM gearbox OR rack and pinion to GM pump - each hose 22”
Part # 131171B
Description: Matte Black power steering hose kit for 1980 and later GM gearboxes or racks (also fits Dodge Omni and Dakota racks) to GM or Ford pumps. Each hose 22'
Part # 131171B-LS1
Description: Matte Black power steering hose kit for 1980 and later GM gearboxes or racks (also fots Dodge Omni and Dakota racks) to LS-1 and LS-3 pumps
Part # 131801
Description: Rubber hose kit for Ford rack to GM or Ford pump (1 piece cast aluminum housing including TRW built Mustang II, Thunderbird and late model Mustang racks). Each hose 22".
Part # 131805
Description: Rubber hose kit for Ford rack to GM or Ford pump (steel rack, Mustang II & Pinto with "bolt-on" pinion), Each hose 22" for drivers side pump
Part # 131851
Description: Rubber hose kit for 1979 and earlier GM gearbox to GM or Ford pump. Each hose 28".
Part # 131871
Description: Rubber hose kit for 1980 and later GM gearboxes, rack and pinions OR Dodge Dakota rack and pinions to GM or Ford pump. Each hose 22".


Power Steering Remote Reservoir Kits

Part # 131102
Description: Stock “stage II” GM pump to remote reservoir w/ 1/2” pipe return fitting (Street & Performance, Mullin’s)
Part # 131106
Description: Stock “stage II” GM pump to remote reservoir w/ 3/8” pipe return fitting (ZOOP’S MARCH etc.)
Part # 131106B
Description: Matte black hose kit. Stock "stage II" GM pump to remote reservoir w/ 3/8" pipe fittings on bottom (March Performance and ZOOP'S)
Part # 131108
Description: Stock “stage II” GM pump to remote reservoir with -10 AN and -6 AN fittings on bottom of reservoir (Billet Specialties)
Part # 131109
Description: Stock “stage II” GM pump to remote reservoir with 1/2” and 1/4” NPT fittings on bottom of reservoir (Flaming River)
Part # 131802
Description: Rubber hose kit for stock "stage II" GM pump to remote reservoir w/ 1/2" pipe return fitting (Street and Performance or Mullins reservoirs) with a -6AN fitting on side of reservoir.
Part # 131806
Description: Rubber hose kit for stock "stage II" GM pump to remote reservoir w/ 3/8" pipe fittings on bottom of reservoir (March Performance or ZOOP'S)
Part # 131808
Description: Rubber hose kit for stock "stage II" GM Pump to remote reservoir with -10 AN and -6 AN fittings on bottom (Billet Specialties remote reservoir)
Part # 131809
Description: Rubber hose kit for stock "stage II" GM pump to remote reservoir with 1/2" and 1/4" pipe fitting on bottom (Flaming River reservoir).


Power Steering Fittings

Part # 131010
Description: #10 AN x 5/8” hose barb straight fitting for remote reservoirs, Detroit Speed and ZOOP’S p/s pumps
Part # 131262
Description: Banjo fitting for 5/8 or 16mm bolt to -6 TEFLON®* hose (field attachable) - use for any Ford or GM pump
Part # 131263
Description: Banjo fitting for 5/8 or 16mm bolt to -6 TEFLON®* hose (field attachable) small GM pump w/ reservoir attached
Part # 131362
Description: Banjo Bolt (special thread pitch) for 5/8-18 OR 16mm x 1.5mm thread pitch, use for any Ford or GM pump
Part # 131908
Description: #8 female AN x 5/8” hose barb 90 degree fitting for Street & Performance P/S pumps
Part # 131910
Description: #10 female AN x 5/8” hose barb 90 degree fitting for Detroit Speed & ZOOP’S P/S pumps


Power Steering Hose Kit (Polished Stainless Steel)

Part # 133101
Description: Ford rack (1 piece cast aluminum rack housing) to GM pump. For TRW built, Mustang II, Thunderbird, and late model Mustang. All fittings are stainless and have been hand polished
Part # 133151
Description: 1965-1979 GM gearbox to GM pump. All fittings are stainless steel and have been hand polished


Hydro-Boost Hose Kit for Power Steering

Part # 131501
Description: Ford rack (1 piece cast aluminum rack housing) to GM pump and GM Hydro-Boost system. For TRW built, Mustang II, Thunderbird and late model Mustang racks
Part # 131505
Description: Ford rack (2 piece steel rack, pinion housing bolts on with 3 bolts) to GM pump and hydro-boost system
Part # 131551
Description: 1965-1979 GM gear box to GM pump and GM hydro-boost system
Part # 131571
Description: 1980-present GM gear box, GM racks, Dodge Omni and Buick Electra to GM pump and GM hydro-boost system


Power Steering Replacement Parts

Part # 131001
Description: Adapter “Button” for Pinto style rack to convert pressure hose seal from o-ring to inverted flare
Part # 131002
Description: Replacement TEFLON® seal for power steering hose fittings (Quantity of 2)
Part # 131003
Description: Replacement copper crush washer for power steering banjo (Quantity of 2)
Part # 131004
Description: Small chrome hose finisher (for 3/8” ID TEFLON® hose)
Part # 131005
Description: Large chrome hose finisher (for 5/8” ID TEFLON® hose)
Part # 131103
Description: 1/2”-20 thread replacement pressure hose for Pinto and Mustang II (built by Ford)
Part # 131104
Description: Replacement pressure hose for TRW built Ford rack and pinions (one piece cast aluminum housing)


Power Steering Flow Control Valves

Part # 131199
Description: Slows “twitchy” steering associated w/ Mustang II style suspensions. Changes flow rate of Type II and Type III (small GM) pumps from 3 gallons per minute to 2 gallons per minute for use with all Ford rack and pinions. Not designed for use with Saginaw pumps (integral reservoir).


Reusable Fittings

Part # 601006
Description: 6 AN (9/16”-18 thread) straight fitting for -6 TEFLON® hose
Part # 601196
Description: 6 SAE (5/8”-18 thread) 90 degree fitting for -6 TEFLON® hose
Part # 601906
Description: 6 AN (9/16”-18 thread) 90 degree fitting for -6 TEFLON® hose
Part # 603006
Description: 6 AN (9/16”-18 thread) straight fitting for -6 TEFLON® hose - stainless steel
Part # 603906
Description: 6 AN (9/16”-18 thread) 90 degree fitting for -6 TEFLON® hose - stainless steel


TEFLON® Hose

Part # 131012
Description: #12 TEFLON® lined hose (1500 lbs. working pressure) per foot (5/8” ID)
Part # 343955
Description: Power Steering Pressure Hose - #6 TEFLON® lined hose (2500 lbs. working pressure) per foot (5/6”ID)
Part # 343956
Description: Power Steering Return Hose - #7 TEFLON® lined hose (2000 lbs. working pressure) per foot (3/8” ID)


Aluminum Weld-On AN Fittings

Part # 702375
Description: Male -6AN weld-on Fittings for custom applications


Power Steering Cooler

Part # 132104
Description: Power steering cooler for 3/8 ID hose, for use in return line ONLY length 4 1/8” x 1” OD
Part # 132105
Description: Power steering cooler w/ male -6 AN fittings, for use in return line ONLY, Length 4 1/8” x 1” OD

*Teflon is a registered trademark of E.I. du Pont de Nemours and Company and distributed for Dana Corporation.

2009© Gotta Show Products Home | New Products | Products | Kit Instructions | Dealers | Show/Event Schedule | Contact Us Site by MDzyn Solutions